China Good quality Giicl Drum-Type Gear Motor Coupling motor coupling

Product Description

GIICL drum gear coupling

Application:
1.Widely used in various mechanical and hydraulic fields 
2.Low-cost maintenance
3.Compensation for axial, radial and angular misalignment
4.Convenient axial plugging assembly
5.Installed horizontally and vertically without using any social tools.
6.Excellent mechanical properties
7.No brittlement at low temperature
8.Good slippery and frictional properties
9.Excellent electrical insulation

Technical data of GIICL drum gear coupling 

Type
 
Nominal torque
(KN.M)
Allow speed
(R/min)
D1(MM) D2(MM) Shaft hole length D D1 D2 C H A B e Rotary inertia
Kg.m2
Weight
    Y J1type
GIICL1 0.4 4000 30 35 42 103 71 50 8 2 36 76 38 0.0571 3.6
GIICL2 0.71 4000 25 28 62 44 115 83 60 8 2 42 88 42 0.006 5.1
GIICL3 1.12 4000 25 28 62 44 127 95 75 8 2 44 90 42 0.571 6.9
GIICL4 1.8 4000 63 65 142 107 149 116 90 8 2 49 98 42 0.5715 14.5
GIICL5 3.15 4000 63 65 142 107 167 134 105 10 2.5 55 108 42 0.571 19.6
GIICL6 5 4000 80 85 90 172 132 187 153 125 10 56 110 42 0.0843 31.5
GIICL7 7.1 3750 100 105 212 167 204 170 140 10 3.5 60 118 42 0.151 47.5
GIICL8 10 3300 100 110 212 167 230 186 155 12 3 67 142 47 0.241 60.2
GIICL9 16 3000 130 135 252 202 256 212 180 12 3 39 146 47 0.470 95.8
GIICL10 22.4 2650 130 145 252 202 287 239 200 14 3.5 78 164 47 0.745 119
GIICL11 35.5 2350 302 242 325 276 325 276 235 14 3.5 81 170 47 1.588 189
GIICL12 50 2100 190 200 325 282 362 313 270 16 4.0 89 190 49 3.055 285
GIICL13 71 1850 190 200 352 282 412 350 300 18 4.5 98 208 49 4.918 360
GIICL14 112 1650 240 250 470 380 512 470 380 22 5.5 182 316 63 17.45 786
GIICL15 180 1500 280 285 470 380 512 470 380 22 5.5 182 316 63 23.925 799
GIICL16 250 1300 280 300 470 380 580 522 430 28 7 209 354 67 29.10 1571
GIICL17 355 1200 250 260 410 330 644 582 490 28 7 198 364 67 53.725 1532
GIICL18 500 1050 340 360 650 540 726 658 540 28 8 222 430 75 99.5 2278
GIICL19 710 950 340 320 470 380 818 748 630 32 8 232 440 75 175.5 3026
GIICL20 1000 800 480 500 650 540 928 838 720 32 10.5 247 470 75 299 3984
GIICL21 1400 750 480 500 650 540 1571 928 810 40 11.5 255 490 75 468.5 4977
GIICL22 1800 650 670 680 900 780 1134 1036 915 40 13 262 510 75 904.75 7738
GIICL23 2500 850 1000 1000 800 1428 1282 1178 1030 50 14.5 299 580 80 1725 11513
GIICL24 3550 550 800 850 1000 880 1428 1322 1175 50 16.5 317 610 80 3131.75 16615
GIICL25 4500 460 1000 1040 1100 1644 1538 1390 50 19 325 620 80 7198.25 27797

Product Display

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

motor coupling

How to Select the Right Motor Coupling for Specific Torque and Speed Requirements?

Selecting the right motor coupling for specific torque and speed requirements is crucial to ensure optimal performance and reliability in a power transmission system. Here are the steps to guide you through the selection process:

1. Identify Torque and Speed Requirements:

Determine the torque and speed requirements of your application. Torque is the rotational force needed to perform the intended task, while speed refers to the rotational speed at which the coupling will operate.

2. Consider Operating Conditions:

Take into account the environmental conditions and operating parameters of your application. Factors such as temperature, humidity, and potential shock loads may influence the coupling’s performance.

3. Calculate Torque and Speed Ratios:

Calculate the torque and speed ratios between the motor and driven equipment. This will help you understand the required torque capacity and misalignment capabilities of the coupling.

4. Choose the Coupling Type:

Select a coupling type that aligns with your torque and speed requirements. For higher torque applications, consider gear couplings, while elastomeric couplings are suitable for lower torque applications with misalignment needs.

5. Check Torque and Speed Ratings:

Consult the manufacturer’s specifications to ensure the selected coupling can handle the calculated torque and speed requirements. Pay attention to both the continuous and peak torque ratings.

6. Misalignment Compensation:

If your application requires misalignment compensation, opt for flexible couplings that can accommodate angular and/or parallel misalignment.

7. Consider Critical Speed:

For high-speed applications, check the coupling’s critical speed rating. Operating near or beyond the critical speed can lead to resonance and coupling failure.

8. Verify Service Life:

Check the expected service life of the coupling under your application’s conditions. A coupling with a longer service life can reduce maintenance needs and downtime.

9. Budget and Cost:

Consider the budget and overall cost of the coupling, including installation and maintenance expenses. Balance the initial cost with the coupling’s expected performance and durability.

10. Seek Expert Advice:

If you are unsure about the best coupling choice for your specific requirements, consult with coupling manufacturers or industry experts who can provide valuable insights and recommendations.

By following these steps and conducting thorough research, you can confidently select the right motor coupling that matches your torque and speed requirements, ensuring efficient power transmission and prolonged equipment lifespan.

“`motor coupling

Specific Safety Precautions When Working with Motor Couplings

Working with motor couplings involves handling mechanical components and power transmission systems, which can pose certain safety risks. It is essential to follow specific safety precautions to prevent accidents and ensure the well-being of personnel. Here are some safety measures to consider:

1. Lockout/Tagout Procedures:

Prior to any maintenance or installation work on motor couplings, follow lockout/tagout procedures to isolate the power source and prevent accidental startup. This ensures the motor and equipment are de-energized, reducing the risk of electrical hazards.

2. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed shoes, when working with motor couplings. PPE provides protection against potential hazards such as flying debris or pinch points.

3. Proper Lifting Techniques:

When handling heavy couplings or equipment, use proper lifting techniques to avoid strain or injury. Seek assistance if needed to lift and position larger components safely.

4. Inspect Coupling Condition:

Before any work, inspect the coupling for signs of wear, damage, or misalignment. Do not work with a damaged coupling, as it may compromise system integrity and safety.

5. Avoid Excessive Force:

Avoid applying excessive force or using tools that are not appropriate for the job when installing or removing couplings. Excessive force can lead to component failure or personal injury.

6. Follow Manufacturer Guidelines:

Adhere to the manufacturer’s guidelines and instructions during installation, maintenance, and troubleshooting processes. Manufacturer recommendations are designed to ensure safe and proper operation.

7. Regular Inspection and Maintenance:

Implement regular inspection and maintenance schedules for motor couplings and associated equipment. Identify and address any issues promptly to prevent potential hazards or failures.

8. Keep Work Area Clean:

Keep the work area clean and free of clutter. A tidy workspace reduces the risk of accidents and improves overall efficiency.

9. Avoid Contact with Rotating Components:

When the motor is energized, avoid contact with rotating coupling components to prevent injury. Ensure the system is de-energized during maintenance tasks.

10. Training and Competence:

Ensure that personnel working with motor couplings are adequately trained and competent in the procedures and safety measures related to coupling installation, maintenance, and operation.

By following these safety precautions, you can minimize risks and create a safer working environment when handling motor couplings and associated power transmission systems.

“`motor coupling

Advantages of Using Motor Couplings in Various Mechanical Power Transmission Setups

Motor couplings offer several advantages in mechanical power transmission setups, making them a popular choice in various industries. Here are some key advantages of using motor couplings:

  • Torque Transmission: Motor couplings efficiently transmit torque from the motor to the driven equipment, enabling the machinery to perform its intended task.
  • Misalignment Compensation: Flexible motor couplings can accommodate misalignment between the motor and driven equipment shafts, reducing stress on bearings and increasing the system’s flexibility.
  • Vibration Damping: Some motor couplings, particularly those with flexible elements, can dampen vibrations generated during motor operation, improving the overall system’s performance and reducing wear on connected components.
  • Overload Protection: Motor couplings with torque-limiting features act as overload protection, preventing damage to the motor or driven equipment under excessive load or torque.
  • Noise Reduction: Well-designed motor couplings can help reduce noise and resonance in the system, contributing to quieter and smoother operation.
  • High Torque Capacity: Certain types of motor couplings, such as gear couplings, offer high torque capacity, making them suitable for heavy-duty applications.
  • Misalignment Tolerance: Flexible couplings can handle both angular and parallel misalignment, ensuring smoother power transmission even in dynamic or changing conditions.
  • Adaptability: Motor couplings are available in various types and sizes, making them adaptable to different motor and driven equipment configurations.
  • Protection of Machinery: By dampening shocks and compensating for misalignment, motor couplings protect the machinery from premature wear and damage.
  • Reduced Maintenance: Properly selected and installed motor couplings can reduce maintenance needs by minimizing wear on connected components and improving overall system reliability.

Motor couplings play a critical role in connecting motors to driven equipment, providing smooth and efficient power transmission while protecting the mechanical system from stress and wear. Proper selection and installation of the appropriate motor coupling type are crucial to maximizing these advantages and ensuring optimal performance in power transmission setups.

“`
China Good quality Giicl Drum-Type Gear Motor Coupling   motor couplingChina Good quality Giicl Drum-Type Gear Motor Coupling   motor coupling
editor by CX 2023-10-08

Recent Posts